Danby · Compact electric
Danby Dryer Repair Calgary
Danby compact dryers are common in Calgary apartments, basement suites and cabins. They are simple machines, and we repair them when it makes sense — and tell you honestly when it does not.
- Same-day visits
- Independent, all-brand techs
- 90-day warranty
Reviewed by Fast Appliance Repair technicians · Updated
Common Danby faults
What goes wrong with Danby dryers
No heat
Heating element, thermal fuse or thermostat — simple parts on a simple dryer.
Takes very long to dry
Compact 120 V dryers are slower by design, but a clogged lint screen or duct makes it much worse.
Repair or replace?
On a low-cost compact dryer we will check the price of parts before recommending repair.
Small, 120 V and simple
Danby is a Canadian company based in Guelph, Ontario, known for apartment-size appliances. Its dryers are mostly portable or compact models that plug into a regular 120 V outlet. A typical Danby portable dryer holds around 3.4 cubic feet, has a 4-inch vent at the back, and can sit on a counter, stand or wall bracket. Inside, it is a basic electric dryer: a small heating element, a thermal fuse and thermostats, a motor, a belt and a fan.
Why Danby dryers dry slowly
A 120 V dryer has a much smaller heater than a full-size 240 V model, so loads take longer even when everything works. Overloading makes it worse, because a small drum needs room to tumble. The biggest preventable problem is venting: if the exhaust is not ducted outside, moist air and lint stay in the room and on the walls. Clean the lint screen every load, keep the vent hose short and straight, and avoid running it on an extension cord.
Repair or replace
The usual Danby repairs are a heating element, thermal fuse, thermostat, door switch or drive belt. Because these dryers cost less than a full-size machine, we look up the part price for your exact model before recommending repair, and we tell you if replacement is the better value. Have the model number ready, usually on a label at the back or inside the door, and tell us whether the drum turns and whether there is any heat at all.
About the brand
Danby in Canadian homes
Danby is a Canadian company from Guelph, Ontario, known for compact and apartment-size appliances. Danby dryers are small, often 120-volt, and usually have simple controls.
Models we see: Compact 24-inch and portable 120 V dryers
Call (587) 779-6919Danby indicator lights
Danby dryers usually have no error codes
Most Danby compact dryers have simple dial controls and indicator lights rather than error codes. Tell us what the dryer is doing and we will diagnose it on site.
Search every brand
Dryer error code lookup
Moved, inherited or bought a used dryer? Search codes from every brand we repair.
Common searches:
Repairs
What we fix on Danby dryers
Dryer Not Heating
The drum turns, the timer counts down, and the clothes come out cold and wet. A dryer that runs but will not heat is th…
Learn moreDryer Not Tumbling
You press start and hear a hum, a click, or nothing at all — and the drum just sits there. Most dryers that will not tu…
Learn moreGas Dryer Repair
Gas dryers are common in Calgary homes, and they fail differently from electric ones. Our licensed technicians test the…
Learn moreElectric Dryer Repair
Electric dryers run on a 240-volt circuit and a large heating coil. When they stop heating, stop tumbling or throw an e…
Learn moreVent & Airflow Service
Lint is the reason most dryers overheat, blow fuses and take forever to dry. When we service a dryer we clean lint out …
Learn moreStacked & Compact Dryers
Condos, townhomes and infills across Calgary often have stacked pairs, one-piece laundry centres, or 24-inch compact an…
Learn moreDryer Error Codes
Look up what the code on your dryer's display means — by brand — and whether you can fix it yourself.
Open lookupBook online
Book Danby dryer repair
Send the basics and we will call you back to confirm a time. In a hurry? Call (587) 779-6919.
FAQ
Danby dryer repair — FAQ
Do you repair Danby gas and electric dryers?
Yes. We repair Danby compact electric dryers across Calgary and nearby towns.
Where is the model number on my Danby dryer?
Usually on a sticker inside the door opening or on the back panel. Have it ready when you call — it helps us bring the right parts.
Is my Danby dryer worth repairing?
In most cases, yes. Common failures like fuses, heating elements, belts, rollers and sensors cost far less than a new dryer. If yours is not worth fixing, the technician will tell you honestly.
Does my Danby portable dryer need to be vented?
Danby portable dryers have a rear exhaust designed to connect to a 4-inch vent hose. Venting the moist, lint-filled air outside or through a window kit protects your walls and air quality. Running it without a vent can leave the room damp and coat surfaces with lint. Follow the venting instructions in your manual.
Can I plug a Danby compact dryer into any outlet?
Most Danby portable dryers use a standard 120 V plug, but they draw a lot of current while heating. Use a properly grounded outlet, ideally on a circuit not shared with other heavy appliances, and avoid extension cords. If the breaker trips often, have the circuit checked rather than switching to a bigger breaker.
Other brands
We repair every major dryer brand
Danby dryer not working?
Same-day visits across Calgary and nearby towns. Clear quote before any work, 90-day parts and labour warranty.