Mon–Fri: 8am–8pm · Sat–Sun: 9am–6pm 90-day parts & labour warranty

Miele · Heat pump, condenser & vented

Miele Dryer Repair Calgary

Miele dryers are built to last 20 years, so they are almost always worth repairing. Many Miele dryers are heat-pump models that need different diagnosis from a vented dryer, and we service them across Calgary.

  • Same-day visits
  • Independent, all-brand techs
  • 90-day warranty

Reviewed by Fast Appliance Repair technicians · Updated

4.9★Google rating · 127+ reviews
Same dayCall before noon
90 daysParts & labour warranty
All brandsGas & electric

Common Miele faults

What goes wrong with Miele dryers

"Clean airways" or filter warnings

Heat-pump Miele dryers have lint filters and a plinth filter. When they clog, the dryer warns you and slows down. Clean them first.

Long drying times

On heat-pump models, blocked filters or a blocked heat exchanger are the usual cause. We clean and test the system.

Fault codes

Miele uses F-codes and text messages on the display. Note the exact wording when you call.

About the brand

Miele in Canadian homes

Miele is a German family-owned premium brand. Most Miele dryers sold in Canada are compact heat-pump models with several filters and a built-in condensate system.

Models we see: T1 heat-pump dryers, vented and condenser models, compact 24-inch dryers

4.9
★★★★★
127+ Google reviews
Call (587) 779-6919

Miele error codes

Miele dryer error codes — what they mean

Codes and wording vary between models and years. Use this as a guide, and tell us exactly what your display shows when you call.

Miele dryer error codes
CodeWhat it meansLikely causeWho fixes it
Clean out airwaysFluff has built up in the airways.Dirty lint filters or plinth filter.Try first
F1Refrigerant temperature sensor short-circuited.Heat-pump temperature sensor.Technician
F41Electronic fault.Electronic control module.Technician
F50Drum overfull, or a software fault.Overloaded drum; otherwise restart or call for service.Try first
F55Laundry was not spun enough before drying.Load too wet — spin at the highest speed first.Try first
F66The fluff filters are soiled.Lint build-up in the fluff filters.Try first
Technical faultA fault with no obvious cause.Switch off and on; if it persists, it needs service.Technician
Overheating or a burning smell? Turn the dryer off, unplug it (or switch off the breaker) and don't run it again until it has been checked. On gas dryers, if you smell gas, leave the house and call ATCO Gas emergency at 1-800-511-3447.

Search every brand

Dryer error code lookup

Moved, inherited or bought a used dryer? Search codes from every brand we repair.

Common searches:

Book online

Book Miele dryer repair

Send the basics and we will call you back to confirm a time. In a hurry? Call (587) 779-6919.

FAQ

Miele dryer repair — FAQ

Do you repair Miele gas and electric dryers?

Yes. We repair Miele heat pump, condenser & vented dryers across Calgary and nearby towns.

Where is the model number on my Miele dryer?

Usually on a sticker inside the door opening or on the back panel. Have it ready when you call — it helps us bring the right parts.

Is my Miele dryer worth repairing?

In most cases, yes. Common failures like fuses, heating elements, belts, rollers and sensors cost far less than a new dryer. If yours is not worth fixing, the technician will tell you honestly.

Miele dryer not working?

Same-day visits across Calgary and nearby towns. Clear quote before any work, 90-day parts and labour warranty.

Call now