LG · Gas, electric & heat pump
LG Dryer Repair Calgary
LG dryers are smart enough to warn you about trouble — Flow Sense codes like d80 and d90 tell you the vent is restricted, while tE1, HS and nP point to sensor and power faults. We repair LG gas, electric and WashTower dryers across Calgary.
- Same-day visits
- Independent, all-brand techs
- 90-day warranty
Reviewed by Fast Appliance Repair technicians · Updated
Common LG faults
What goes wrong with LG dryers
d80 / d90 / d95 airflow warnings
These are warnings, not failures: the vent is 80–95% blocked. Clean the lint screen and vent run. If they persist after cleaning, call us.
nP — no heat on electric models
LG shows nP when the dryer detects a power problem to the heater, often one tripped leg of the 240 V breaker. Reset it first.
WashTower and stacked units
LG WashTowers combine washer and dryer in one tower. We repair the dryer section in place whenever access allows.
About the brand
LG in Canadian homes
LG is one of the top dryer brands in Canada and also built many Kenmore dryers (model prefix 796). LG dryers have Flow Sense airflow warnings that tell you when the vent is getting blocked.
Models we see: Front-load and stacked WashTower dryers, TurboSteam, Smart ThinQ models, all-in-one washer-dryers
Call (587) 779-6919LG error codes
LG dryer error codes — what they mean
Codes and wording vary between models and years. Use this as a guide, and tell us exactly what your display shows when you call.
| Code | What it means | Likely cause | Who fixes it |
|---|---|---|---|
| d75 / d80 / d90 / d95 | Exhaust airflow is restricted; the number is the % blocked. | Lint-clogged or crushed vent; d80 on gas models can mean no gas. | Try first |
| tE1 / tE3 | Thermistor (temperature sensor) problem. | Failed thermistor or control fault. | Technician |
| tE2 | Thermistor error, usually in cold conditions. | Cold or iced exhaust duct, steam cycles, or a failed thermistor. | Try first |
| tE4 | Thermistor fault — temperature out of range. | Failed thermistor. | Technician |
| nP | No current detected at the heater. | Tripped breaker leg, home wiring or outlet problem. | Try first |
| PS | Improper voltage in the power cord. | White and red wires reversed at the terminal block. | Technician |
| dE | The door is not fully closed. | Clothing caught in the door, or lint filter not seated. | Try first |
| HS | Humidity sensor error. | Dirty or failed moisture sensor bars below the lint filter. | Try first |
| F0 / Insert Filter | The lint filter is not inserted properly. | Lint filter missing or not fully seated. | Try first |
| gAS | The gas dryer is not receiving gas. | Gas valve closed or kinked gas line. | Try first |
| PF | Power failure, usually after an outage. | Power interruption; if it keeps showing, it needs service. | Try first |
| E05 | Water supply problem for steam cycles. | Tap closed or frozen, clogged inlet filter or inlet valve. | Try first |
Step-by-step LG code guides
Search every brand
Dryer error code lookup
Moved, inherited or bought a used dryer? Search codes from every brand we repair.
Common searches:
Repairs
What we fix on LG dryers
Dryer Not Heating
The drum turns, the timer counts down, and the clothes come out cold and wet. A dryer that runs but will not heat is th…
Learn moreDryer Not Tumbling
You press start and hear a hum, a click, or nothing at all — and the drum just sits there. Most dryers that will not tu…
Learn moreGas Dryer Repair
Gas dryers are common in Calgary homes, and they fail differently from electric ones. Our licensed technicians test the…
Learn moreElectric Dryer Repair
Electric dryers run on a 240-volt circuit and a large heating coil. When they stop heating, stop tumbling or throw an e…
Learn moreVent & Airflow Service
Lint is the reason most dryers overheat, blow fuses and take forever to dry. When we service a dryer we clean lint out …
Learn moreStacked & Compact Dryers
Condos, townhomes and infills across Calgary often have stacked pairs, one-piece laundry centres, or 24-inch compact an…
Learn moreDryer Error Codes
Look up what the code on your dryer's display means — by brand — and whether you can fix it yourself.
Open lookupFrom our technicians
LG dryer articles
Winter Dryer Vents in Calgary: Frost, Lint and Fire Risk
Cold snaps can freeze the outside vent flap shut, and lint builds up fast when air cannot escape. Here is how to spot a blocked vent before it causes a problem.
Read article nP no heatError CodesLG Dryer nP Code: No Heat, Breaker Checks and What It Really Means
The LG nP code means no current is reaching the heater, so the drum turns but the air stays cold. Here is how to check the breaker, what PS and tE codes mean, and when to call.
Read article Igniter, no flameDryer RepairGas Dryer Igniter Glows but No Flame? Gas Valve Coils and Flame Sensor
When a gas dryer's igniter glows but the burner never lights, the igniter is usually fine. Weak gas valve coils or a faulty flame sensor are the usual suspects. Here's how to tell.
Read articleBook online
Book LG dryer repair
Send the basics and we will call you back to confirm a time. In a hurry? Call (587) 779-6919.
FAQ
LG dryer repair — FAQ
Do you repair LG gas and electric dryers?
Yes. We repair LG gas, electric & heat pump dryers across Calgary and nearby towns.
Where is the model number on my LG dryer?
Usually on a sticker inside the door opening or on the back panel. Have it ready when you call — it helps us bring the right parts.
Is my LG dryer worth repairing?
In most cases, yes. Common failures like fuses, heating elements, belts, rollers and sensors cost far less than a new dryer. If yours is not worth fixing, the technician will tell you honestly.
Other brands
We repair every major dryer brand
LG dryer not working?
Same-day visits across Calgary and nearby towns. Clear quote before any work, 90-day parts and labour warranty.