Mon–Fri: 8am–8pm · Sat–Sun: 9am–6pm 90-day parts & labour warranty

Hisense · Heat pump (ventless)

Hisense Dryer Repair Calgary

Hisense is one of the newest dryer brands in Canada, and its compact heat-pump dryer fits neatly into Calgary condos and stacked laundry closets. We repair Hisense dryers and know what the F-codes on the display mean.

  • Same-day visits
  • Independent, all-brand techs
  • 90-day warranty

Reviewed by Fast Appliance Repair technicians · Updated

4.9★Google rating · 127+ reviews
Same dayCall before noon
90 daysParts & labour warranty
All brandsGas & electric

Common Hisense faults

What goes wrong with Hisense dryers

Heat-pump dryers need clean filters

A ventless heat-pump dryer pushes air through lint filters and a heat exchanger. When those clog, drying slows down. Clean them first, then call us if it is still slow.

F-codes on the display

Hisense shows F-codes for motor, voltage, board-communication and sensor faults. Several board codes clear after a power reset. If they come back, call for service.

Water tank and drain

Ventless dryers collect water in a tank or pump it to a drain. A full tank or kinked drain hose will stop the cycle.

About the brand

Hisense in Canadian homes

Hisense launched its laundry pair in Canada in 2025, and its 24-inch ventless heat-pump dryer is sold at Best Buy, Costco, The Brick and other Canadian retailers. Hisense also owns the Gorenje and Asko brands.

Models we see: 24-inch 4.5 cu ft ventless heat-pump dryer (DH5S452BW), stacked laundry pair

4.9
★★★★★
127+ Google reviews
Call (587) 779-6919

Hisense error codes

Hisense dryer error codes — what they mean

Codes and wording vary between models and years. Use this as a guide, and tell us exactly what your display shows when you call.

Hisense dryer error codes
CodeWhat it meansLikely causeWho fixes it
F06Motor stall.Drum motor locked or failed.Technician
F09Supply voltage too high or too low.Household voltage out of range — check the breaker; wiring needs an electrician.Try first
F10Motor phase fault.Motor winding or motor drive fault.Technician
F20Display board / Wi-Fi communication fault.Wi-Fi module or display board.Technician
F21Display panel and power board not communicating.Board glitch — reset the power; if it returns, call for service.Try first
F22Display, motor and power boards not communicating.Board glitch — reset the power; if it returns, call for service.Try first
F50 / F51Abnormal sensor reading.Faulty sensor or sensor wiring.Technician

These codes are from the Hisense Canada owner's manual for the DH5S452BW. For F09 (voltage), check the breaker first; if the household voltage itself is wrong, that needs an electrician.

Overheating or a burning smell? Turn the dryer off, unplug it (or switch off the breaker) and don't run it again until it has been checked. On gas dryers, if you smell gas, leave the house and call ATCO Gas emergency at 1-800-511-3447.

Search every brand

Dryer error code lookup

Moved, inherited or bought a used dryer? Search codes from every brand we repair.

Common searches:

Book online

Book Hisense dryer repair

Send the basics and we will call you back to confirm a time. In a hurry? Call (587) 779-6919.

FAQ

Hisense dryer repair — FAQ

Do you repair Hisense gas and electric dryers?

Yes. We repair Hisense heat pump (ventless) dryers across Calgary and nearby towns.

Where is the model number on my Hisense dryer?

Usually on a sticker inside the door opening or on the back panel. Have it ready when you call — it helps us bring the right parts.

Is my Hisense dryer worth repairing?

In most cases, yes. Common failures like fuses, heating elements, belts, rollers and sensors cost far less than a new dryer. If yours is not worth fixing, the technician will tell you honestly.

Hisense dryer not working?

Same-day visits across Calgary and nearby towns. Clear quote before any work, 90-day parts and labour warranty.

Call now