Fisher & Paykel · Electric & gas
Fisher & Paykel Dryer Repair Calgary
Fisher & Paykel dryers are thoughtfully engineered, and many of them show fault codes that help pinpoint the problem. We repair Fisher & Paykel vented and heat-pump dryers in Calgary.
- Same-day visits
- Independent, all-brand techs
- 90-day warranty
Reviewed by Fast Appliance Repair technicians · Updated
Common Fisher & Paykel faults
What goes wrong with Fisher & Paykel dryers
Fault codes
Fisher & Paykel dryers display numbered fault codes. Note the exact code and model number when you call.
No heat
Heater, thermal cut-out and temperature sensor faults are the most common causes.
Long drying times
Restricted airflow or clogged filters on heat-pump models.
About the brand
Fisher & Paykel in Canadian homes
Fisher & Paykel is a New Zealand brand owned by Haier since 2012. Its laundry is no longer widely marketed in North America, but many Fisher & Paykel dryers are still running in Calgary homes and parts are still available.
Models we see: Front-load and top-load-pair dryers, AeroCare and SmartDrive-era pairs
Call (587) 779-6919Fisher & Paykel error codes
Fisher & Paykel dryer error codes — what they mean
Codes and wording vary between models and years. Use this as a guide, and tell us exactly what your display shows when you call.
| Code | What it means | Likely cause | Who fixes it |
|---|---|---|---|
| E1 | Inlet thermistor short circuit (varies by model). | Failed inlet thermistor or wiring. | Technician |
| E2 | Outlet thermistor short circuit (varies by model). | Failed outlet thermistor or wiring. | Technician |
| E3 | Inlet thermistor open circuit (varies by model). | Failed inlet thermistor or broken wire. | Technician |
| E4 | Outlet thermistor open circuit (varies by model). | Failed outlet thermistor or broken wire. | Technician |
| E7 | Drum failure (varies by model). | Broken belt, drum or motor drive problem. | Technician |
| E9 / EA | Moisture sensor rods shorted or open (varies by model). | Dirty or failed sensor rods or wiring. | Technician |
| Err2 | Condensate tank or pump fault (varies by model). | Float switch or condensate pump failure. | Technician |
| Err6 | Restricted airflow (varies by model). | Clogged lint filter or condenser. | Try first |
Fisher & Paykel codes vary between model generations. Use this as a guide and tell us the exact code and model number.
Search every brand
Dryer error code lookup
Moved, inherited or bought a used dryer? Search codes from every brand we repair.
Common searches:
Repairs
What we fix on Fisher & Paykel dryers
Dryer Not Heating
The drum turns, the timer counts down, and the clothes come out cold and wet. A dryer that runs but will not heat is th…
Learn moreDryer Not Tumbling
You press start and hear a hum, a click, or nothing at all — and the drum just sits there. Most dryers that will not tu…
Learn moreGas Dryer Repair
Gas dryers are common in Calgary homes, and they fail differently from electric ones. Our licensed technicians test the…
Learn moreElectric Dryer Repair
Electric dryers run on a 240-volt circuit and a large heating coil. When they stop heating, stop tumbling or throw an e…
Learn moreVent & Airflow Service
Lint is the reason most dryers overheat, blow fuses and take forever to dry. When we service a dryer we clean lint out …
Learn moreStacked & Compact Dryers
Condos, townhomes and infills across Calgary often have stacked pairs, one-piece laundry centres, or 24-inch compact an…
Learn moreDryer Error Codes
Look up what the code on your dryer's display means — by brand — and whether you can fix it yourself.
Open lookupBook online
Book Fisher & Paykel dryer repair
Send the basics and we will call you back to confirm a time. In a hurry? Call (587) 779-6919.
FAQ
Fisher & Paykel dryer repair — FAQ
Do you repair Fisher & Paykel gas and electric dryers?
Yes. We repair Fisher & Paykel electric & gas dryers across Calgary and nearby towns.
Where is the model number on my Fisher & Paykel dryer?
Usually on a sticker inside the door opening or on the back panel. Have it ready when you call — it helps us bring the right parts.
Is my Fisher & Paykel dryer worth repairing?
In most cases, yes. Common failures like fuses, heating elements, belts, rollers and sensors cost far less than a new dryer. If yours is not worth fixing, the technician will tell you honestly.
Other brands
We repair every major dryer brand
We repair Fisher & Paykel dryers in
Fisher & Paykel dryer not working?
Same-day visits across Calgary and nearby towns. Clear quote before any work, 90-day parts and labour warranty.