GE Profile · Gas, electric & combo
GE Profile Dryer Repair Calgary
GE Profile dryers add smart features and bigger capacities to GE's proven design. We repair GE Profile gas and electric dryers and the newer all-in-one combo units across Calgary.
- Same-day visits
- Independent, all-brand techs
- 90-day warranty
Reviewed by Fast Appliance Repair technicians · Updated
Common GE Profile faults
What goes wrong with GE Profile dryers
Blocked vent warnings
Profile dryers can sense restricted exhaust. Clean the vent run and the warning usually clears.
No heat
Elements and thermal fuses on electric models; igniters and gas valve coils on gas models.
Combo washer-dryers
Ventless combo units dry with a heat pump. Clogged filters and condenser problems are common causes of slow drying.
About the brand
GE Profile in Canadian homes
GE Profile is GE Appliances' upper-mid line. Profile dryers use the same diagnostic system as GE, and some newer models report vent blockage in the SmartHQ app.
Models we see: GE Profile front-load and top-load-pair dryers, Smart dryers, UltraFast ventless washer-dryer combos
Call (587) 779-6919GE Profile error codes
GE Profile dryer error codes — what they mean
Codes and wording vary between models and years. Use this as a guide, and tell us exactly what your display shows when you call.
| Code | What it means | Likely cause | Who fixes it |
|---|---|---|---|
| E01 / 001 | Inlet thermistor reads shorted (varies by model). | Failed inlet thermistor or wiring. | Technician |
| E02 / 002 | Outlet thermistor reads shorted (varies by model). | Failed outlet thermistor or wiring. | Technician |
| E03 / 003 | Inlet thermistor circuit open (varies by model). | Failed inlet thermistor or broken wire. | Technician |
| E04 / 004 | Outlet thermistor circuit open (varies by model). | Failed outlet thermistor or broken wire. | Technician |
| 005 | Control memory (EEPROM) error. | Main control board. | Technician |
| 006 | Stuck button error. | Stuck key or failed control panel. | Technician |
| 008 | Door switch stuck closed after five cycles. | Failed door switch or wiring. | Technician |
| E7 | Power supply miswired (L1 and neutral swapped). | Installation wiring error at the terminal block. | Technician |
| CLg / 11 | Blocked vent detected; the dryer keeps running. | Lint clog or restriction in the exhaust duct. | Try first |
| dE | Door fail signal. | Door switch or door switch wiring. | Technician |
| PF | Power failure while running. | Power interruption. | Try first |
GE Profile dryers share GE's code set. Most codes only show in service mode, and the format depends on the model.
Search every brand
Dryer error code lookup
Moved, inherited or bought a used dryer? Search codes from every brand we repair.
Common searches:
Repairs
What we fix on GE Profile dryers
Dryer Not Heating
The drum turns, the timer counts down, and the clothes come out cold and wet. A dryer that runs but will not heat is th…
Learn moreDryer Not Tumbling
You press start and hear a hum, a click, or nothing at all — and the drum just sits there. Most dryers that will not tu…
Learn moreGas Dryer Repair
Gas dryers are common in Calgary homes, and they fail differently from electric ones. Our licensed technicians test the…
Learn moreElectric Dryer Repair
Electric dryers run on a 240-volt circuit and a large heating coil. When they stop heating, stop tumbling or throw an e…
Learn moreVent & Airflow Service
Lint is the reason most dryers overheat, blow fuses and take forever to dry. When we service a dryer we clean lint out …
Learn moreStacked & Compact Dryers
Condos, townhomes and infills across Calgary often have stacked pairs, one-piece laundry centres, or 24-inch compact an…
Learn moreDryer Error Codes
Look up what the code on your dryer's display means — by brand — and whether you can fix it yourself.
Open lookupBook online
Book GE Profile dryer repair
Send the basics and we will call you back to confirm a time. In a hurry? Call (587) 779-6919.
FAQ
GE Profile dryer repair — FAQ
Do you repair GE Profile gas and electric dryers?
Yes. We repair GE Profile gas, electric & combo dryers across Calgary and nearby towns.
Where is the model number on my GE Profile dryer?
Usually on a sticker inside the door opening or on the back panel. Have it ready when you call — it helps us bring the right parts.
Is my GE Profile dryer worth repairing?
In most cases, yes. Common failures like fuses, heating elements, belts, rollers and sensors cost far less than a new dryer. If yours is not worth fixing, the technician will tell you honestly.
Other brands
We repair every major dryer brand
We repair GE Profile dryers in
GE Profile dryer not working?
Same-day visits across Calgary and nearby towns. Clear quote before any work, 90-day parts and labour warranty.