Whirlpool · Gas & electric
Whirlpool Dryer Repair Calgary
Whirlpool dryers are tough, simple and everywhere in Calgary — and when they fail, it is usually a thermal fuse, heating element, belt or idler pulley. Newer models show F-codes like F3 E1 or F4 E1 that point us straight at the fault.
- Same-day visits
- Independent, all-brand techs
- 90-day warranty
Reviewed by Fast Appliance Repair technicians · Updated
Common Whirlpool faults
What goes wrong with Whirlpool dryers
Won't start at all
On many Whirlpool-built electric dryers the thermal fuse cuts power to the motor, not just the heat. A dead dryer with a working breaker is very often a blown thermal fuse — and a vent that needs cleaning.
Runs but no heat
Electric models lose a heating element or high-limit thermostat; gas models lose an igniter or gas valve coils. We test each part rather than replacing them all.
Squeal, thump or rumble
Worn drum rollers and idler pulleys are classic Whirlpool wear items on older models. We replace them together with the belt when they are worn.
About the brand
Whirlpool in Canadian homes
Whirlpool is the biggest dryer maker in Canadian homes, and the same Whirlpool engineering sits inside Maytag, Amana, Inglis, KitchenAid and many Kenmore dryers. That means parts are easy to get and most repairs are done on the first visit.
Models we see: Top-load-pair and front-load dryers, Duet and Cabrio-era pairs, Smart dryers, stacked laundry centres
Call (587) 779-6919Whirlpool error codes
Whirlpool dryer error codes — what they mean
Codes and wording vary between models and years. Use this as a guide, and tell us exactly what your display shows when you call.
| Code | What it means | Likely cause | Who fixes it |
|---|---|---|---|
| AF / Check Vent (F4 E3) | Airflow through the dryer is restricted; it keeps running. | Clogged lint screen or vent, or a crushed or kinked vent hose. | Try first |
| PF | A power failure interrupted the cycle. | Power outage or brief loss of power. | Try first |
| L2 | Low or no line voltage — the heater may not turn on. | Tripped breaker, blown fuse or incorrect power cord install. | Try first |
| F4 E4 | Low or no line voltage to the heater. | Tripped breaker, loose cord terminal screws or home supply issue. | Try first |
| F1 E1 | Main control fault (varies by model). | Main control board, or no voltage detected at the heater relay. | Technician |
| F2 E1 | Keypad (control panel) fault. | Stuck key or failed keypad / user interface. | Technician |
| F2 E2 | Keypad or control fault. | Keypad, user interface or control board. | Technician |
| F2 E5 | User interface or its wiring has a fault. | User interface board or wiring harness. | Technician |
| F3 E1 | Exhaust thermistor fault. | Failed exhaust thermistor or its wiring. | Technician |
| F3 E2 | Five loads dried with no moisture-sensor reading. | Dryer not level, very small loads, or a failed moisture sensor. | Try first |
| F3 E3 | Inlet thermistor fault. | Failed inlet thermistor or its wiring. | Technician |
| F4 E1 | Heater system fault. | Heating element or heater relays on the control. | Technician |
| F6 E1 | Control boards are not communicating. | Main control board, touchpad / user interface or wiring. | Technician |
| F7 E1 | Motor system fault. | Drive motor, motor control or motor wiring. | Technician |
Newer Whirlpool-built dryers show codes as F#E# (for example F3 E1). Older Duet-era models use two-digit codes such as F01 or F22. The same codes apply to Maytag, Amana, Inglis, KitchenAid and Whirlpool-built Kenmore dryers.
Step-by-step Whirlpool code guides
Search every brand
Dryer error code lookup
Moved, inherited or bought a used dryer? Search codes from every brand we repair.
Common searches:
Repairs
What we fix on Whirlpool dryers
Dryer Not Heating
The drum turns, the timer counts down, and the clothes come out cold and wet. A dryer that runs but will not heat is th…
Learn moreDryer Not Tumbling
You press start and hear a hum, a click, or nothing at all — and the drum just sits there. Most dryers that will not tu…
Learn moreGas Dryer Repair
Gas dryers are common in Calgary homes, and they fail differently from electric ones. Our licensed technicians test the…
Learn moreElectric Dryer Repair
Electric dryers run on a 240-volt circuit and a large heating coil. When they stop heating, stop tumbling or throw an e…
Learn moreVent & Airflow Service
Lint is the reason most dryers overheat, blow fuses and take forever to dry. When we service a dryer we clean lint out …
Learn moreStacked & Compact Dryers
Condos, townhomes and infills across Calgary often have stacked pairs, one-piece laundry centres, or 24-inch compact an…
Learn moreDryer Error Codes
Look up what the code on your dryer's display means — by brand — and whether you can fix it yourself.
Open lookupFrom our technicians
Whirlpool dryer articles
Why Your Dryer Thermal Fuse Keeps Blowing (and How to Stop It)
A thermal fuse that keeps blowing is a warning, not a bad part. Here's how restricted airflow and stuck thermostats cause it, and what to check before you buy another fuse.
Read article Element failedDryer RepairElectric Dryer Heating Element Signs: How to Tell It Has Failed
Cold air from an electric dryer often means a burned-out heating element, but a tripped breaker leg looks exactly the same. Here are the signs, and the breaker check to do first.
Read article Sensor barsMaintenance TipsDryer Moisture Sensor Cleaning: Fix Auto-Dry Ending Too Early
If your dryer's auto-dry cycle ends while clothes are still damp, dirty moisture sensor bars are a likely culprit. Here is how to find them and clean them with rubbing alcohol.
Read articleBook online
Book Whirlpool dryer repair
Send the basics and we will call you back to confirm a time. In a hurry? Call (587) 779-6919.
FAQ
Whirlpool dryer repair — FAQ
Do you repair Whirlpool gas and electric dryers?
Yes. We repair Whirlpool gas & electric dryers across Calgary and nearby towns.
Where is the model number on my Whirlpool dryer?
Usually on a sticker inside the door opening or on the back panel. Have it ready when you call — it helps us bring the right parts.
Is my Whirlpool dryer worth repairing?
In most cases, yes. Common failures like fuses, heating elements, belts, rollers and sensors cost far less than a new dryer. If yours is not worth fixing, the technician will tell you honestly.
Other brands
We repair every major dryer brand
We repair Whirlpool dryers in
Whirlpool dryer not working?
Same-day visits across Calgary and nearby towns. Clear quote before any work, 90-day parts and labour warranty.